Tips For Troubleshooting Your Home Alarm System In Augusta
System hiccups and false alarms can be aggravating, and even more concerning, could prevent your security system from working how it should. Fortunately, most troubles, from dead batteries to false alarms, are simple to remedy. Explore our tips for troubleshooting your home alarm system in Augusta. We’ll help keep your family shielded and your system running as it should.
Test Your Home Security System In Augusta
One of the most effective ways to troubleshoot your property’s security is to test it! Modern systems have a test mode so you don’t by accident prompt an emergency response. Once in test mode, follow these steps:
- Activate your system as you would when leaving.
- Open a window or door that has a contact sensor, or try to set off something else. Shut the window or door once you’re done so it doesn’t trip the alarm when you switch out of test mode.
- Allow the alarm to go off for 60 seconds to ensure communications with the security company and to produce an entry in the alarm activity log.
- Proceed to test devices as needed
- Review the systems’s activity log to confirm functionality.
No need to worry, monitoring agents can tell that your system is being tested. Be sure to turn test mode off when done. It’s smart to test monthly or whenever you adjust your home’s phone or internet connectivity.
Check The Position And State Of Motion Detectors
Although an essential element of your alarm system, motion detectors are notorious for false alarms. You can help prevent them with a few basic troubleshooting steps.
- Perform a physical inspection. Is there anything that could move within the sensor’s detection area, like a curtain taken by a breeze?
- Is the sensor clean? Cobwebs, dirt, and debris can result in malfunctions. Check to confirm the face is clean.
- Does the motion detector offer pet immunity you can activate? Some sensors can be set to ignore pets weighing as much as 100 pounds.
- When was the battery replaced? Low batteries might impact performance or lead to false alarms.
- Is a heat source impacting the sensor? Excessive heat from a fireplace, direct sun, or something else can set off an alarm.
Keep Batteries Ready And Look Out For Low Battery Notifications
One helpful benefit of the latest home security systems is that they’ll notify you when batteries are running low. If your system has a control panel or smartphone app, you’ll usually discover notifications there. Depending on the alarm, you could detect an intermittent beep when batteries are low.
Contact sensors, smoke detectors, motion sensors, and other wireless tools have batteries that need to be replaced every 1 to 2 years. It’s a good idea to keep batteries ready and set a replacement schedule. Many systems also come with a backup battery for the primary control panel. This backup battery keeps your system running if you have a power outage and should recharge itself once power is restored. If it fails to recharge, you will need to replace it.
Troubleshooting Is Simple With ADT Home Security In Augusta
As the leading name in home security, ADT builds systems that provide unrivaled functionality and convenience. Getting into test mode is straightforward through the ADT+ app or MyADT.com, and you’ll always get updates when a battery is nearing depletion. Reach out to Secure24 Alarm Systems, an authorized ADT dealer, to get more details and design a system perfectly suited to your Augusta home and family. Call (706) 397-7051 or submit our form today!